RAID0
como fazer Raid0 se você estiver recebendo VAL 5 e for expulso do Fortnite/banimento atrasado
Para RAID0 requer uma reinstalação do Windows
MSI RAID TUTORIAL: Intel and AMD
How to setup RAID array for Intel chipset
Upon powering on the PC, please start hitting the [Del] key continuously to enter the BIOS menu,
Select [SETTINGS] → select [Advanced] → Set [SATA mode] as [RAID/Optane Mode].
Press [F10] → Select [Yes] to save and exit, the PC will restart.
Upon powering on the PC, please start hitting the [Del] key continuously to enter the BIOS menu,
Select [SETTINGS] → [Advanced] → select [Intel(R) Rapid Storage Technology].
Select [Create RAID Volume] (Note: All of the data will be wiped, please backup your data.)
Select [RAID Level]: RAID0 or Volume if available.
Select all available disks.
Click [create Volume]
You can see the RAID Volumes has been created at this moment, take a picture to show later in ticket.
How to setup RAID array for AMD chipset
Upon powering on the PC, please start hitting the [Del] key continuously to enter the BIOS menu,
Select [Settings] → Click [Advanced] → Set up [SATA mode] as [RAID mode]
Press [F10] → Click [Yes] to save and exit, the PC will restart.
Upon powering on the PC, please start hitting the [Del] key continuously to enter the BIOS menu,
Select [SETTINGS] → [Advanced] → select [RAIDXpert2 Configuration Utility].
Select [Array Management]
If the [Create Array] is grey out, it means the current disk is set in RAID array already. Please click [Delete Array] to re-create RAID.
Select [Check All] → Click [Delete Array(s)]
Set [Confirm] as [Enable] → and click [YES]
Note: All of the data will be wiped, please backup your data.
The existing Arrays have been deleted.
Click [Create Array]
Click [Select RAID Level]: RAID0 or Volume if available.
Click [Select Physical Disks]
Select the RAID disks. For example: setup [Physical Disk 0:1:3]& [Physical Disk0:1:7] as [Enable] → Click [Apply Changes]
Select [Create Array]
The RAID volume has created.
ASUS RAID TUTORIAL
Intel Motherboard create RAID
Power on the system and press “delete” key to enter BIOS [EZ Mode]，check the connect drive in Storage Information
Press F7 key and enter [Advanced Mode].
Click [PCH Storage Configuration] item on Advanced page
[SATA Mode Selection] item and set to [Intel RST Premium With Intel Optane System Acceleration(RAID)].
click [M.2_1 PCIE Storage RAID Support] and set to [RST Controlled]
Click [M.2_2 PCIE Storage RAID Support] and set to [RST Controlled]
Click [Boot] page and set [Launch CSM] item to [Disabled]
Press F10 key and click OK then the system will auto reboot
Press “delete ”key after the system reboot and enter BIOS [EZ Mode]
Press F7 key and enter [Advanced Mode] as below picture
Click [Advanced] page and click [Intel(R) Rapid Storage Technology] item
Click [Create RAID Volume] item
Set a random RAID name and choose RAID Level: RAID0 or Volume if available.
Select All Disks Available!
Click [Create Volume] to create RAID
AMD Motherboard Create RAID
Power on the system and press “delete” key to enter BIOS [Advanced Mode]
Click [Advanced] page and click [SATA Configuration] item
Click [SATA Mode] item and set to [RAID].
Set M.2 Storage RAID to [Enabled].
Click [Boot] page and set [Launch CSM] item to [Disabled]
Press F10 key and click OK ,then the system will auto
Press “delete” key to enter BIOS [Advanced Mode]when the system reboot, click [Advanced] page and click [RAIDXpert2 Configuration Utility] ite
Click [Array Management]
Click [Create Array] item, if its unavailable to click, make sure to click [Delete Array] and then try again to create your array.
Click [Select RAID Level] item and set RAID level: RAID0 or Volume if available.
Click [Select Physical Disks] item
Select all disks and set to [On] ,click [Apply Changes] item
Click [Create Array] item
Raid volume has been created.
Gigabyte Intel RAID Tutorial
Step 0: Turn on your computer and press <Delete> to enter BIOS Setup during the POST (Power-On Self-Test). Go to Peripherals\SATA And RST Configuration, make sure SATA Controller(s) is enabled. To create RAID, set SATA Mode Selection to Intel RST Premium With Intel Optane System Acceleration.
Step 1: In BIOS Setup, go to BIOS tab and set CSM Support to Disabled. Save the changes and exit BIOS Setup.
Step 2: After the system reboot, enter BIOS Setup again. Then enter the Peripherals\Intel(R) Rapid Storage Technology sub-menu.
Step 3: On the Intel(R) Rapid Storage Technology menu, press <Enter> on Create RAID Volume to enter the Create RAID Volume screen. Enter a random volume name with 1~16 letters (letters cannot be special characters) under the Name item and press <Enter>. Then, select RAID0 or Volume if available. Next, use the down arrow key to move to Select Disks.
Step 4: Under Select Disks item, select all hard drives to be included in the RAID array. Press the <Space> key on the hard drives to be selected (selected hard drives are marked with "X").
Step 5: Move to Create Volume and press <Enter> to begin.
After completing, you'll be brought back to the Intel(R) Rapid Storage Technology screen. Under RAID Volumes you can see the new RAID volume.
Raid volume created.
Gigabyte AMD RAID Tutorial
Step 0: Turn on your computer and press <Delete> to enter BIOS Setup during the POST (Power-On Self-Test). Under Settings\IO Ports, set SATA Configuration\SATA Mode to RAID. Then save the settings and restart your computer. (If you want to use NVMe PCIe SSDs to configure RAID, make sure to set NVMe RAID mode to Enabled.)
Step 1: In BIOS Setup, go to BIOS tab and set CSM Support to Disabled. Save the changes and exit BIOS Setup.
After the system reboot, enter BIOS Setup again. Then enter the Settings\RAIDXpert2 Configuration Utility sub-menu.
Step 3: On the RAIDXpert2 Configuration Utility screen, press <Enter> on Array Management to enter the Create Array screen. If you cannot create an array, please press <Enter> on Delete Array first, then create your arrays.
Then, select RAID0 or Volume, we recommend Volume if available. Next, press <Enter> on Select Physical Disks to enter the Select Physical Disks screen.
Step 4: On the Select Physical Disks screen, select the hard drives to be included in the RAID array and set them to Enabled. Next, use the down arrow key to move to Apply Changes and press <Enter>.Then return to the previous screen and leave the Array Size, Array Size Unit, Read Cache Policy and Write Cache Policy as is.
Step 5: After setting the capacity, move to Create Array and press <Enter> to begin.
Raid volume created
AMD Raid Driver - Click Here
Intel Raid Driver - Click Here
Intel: Requer dois SSDs ou HDDs
Last updated